In place of the traditional coil in tank style calorifier, together with RM Cylinders we have developed an external heat exchanger module which
manifolds directly into the accumulators pre-arranged ports.
This allows a significantly higher kW transfer than would normally be possible if using internal heat exchange coils while also retaining the
full 500L or 1000L storage capacity. The result is large volume hot water production for less cost and a smaller foot print.
The 500 and 1000L share the same convenient tapping size and positions which will accept both the 100kW or 200kW Habanero modules.
- Heat exchanger brand/type: GEA / AISI304 brased plate
- Maximum transfer: 200 kW
- Primary required flow: 14.7m3/hr
- Primary pressure drop: 35 kPa
- Secondary pump type: 32mm Bronze re circulating
- Voltage: 230V
- Maximum consumption: 225 watt
Hot Water Production Performance
500L = 4400 litres (60min) 8200 litres (120min) 12000 litres (180min), Recovery = 6 min
1000L = 5100 litres (60min) 8900 litres (120min) 12700 litres (180min), Recovery = 11 min
Domestic installation guarantee:
5 YEARS parts and labour plus 6 - 10 YEARS parts only
Commecial installation guarantee:
5 YEARS parts and labour