Pressure Reducing Valves CPR4IN1
Search
Close
What are you looking for?
Caleffi 539 Series 20mm inlet set
Factory assembled 4 in 1 isolator, non-return, strainer and pressure reducing module
Replaceable cartridge and strainer
Ball valve with Butterfly handle
Assembled with ‘Loxeal’ 58.11 WRAS approved thread sealing compound
Maximum upstream pressure: 2000 kPa
Downstream pressure setting range: 100 – 600 kPa
Factory setting: 500 kPa
Maximum working temperature: 80°C
PRV’s can be installed in either vertical or horizonal pipework and must not installed upside down causing the valve to fail and voiding any warranty.
Cannot be installed below ground or outside location without protection from frost and weather. Please follow the installation manual in the packaging.
Combined group for pressure control in domestic water systems.
With integrated check valve, ball valve and linestrainer.
Material: dezincification resistant brass DR "low lead". EN 12165 CW724R.
Pressure reducing valve certified to EN 1567.
Check valve certified to EN 13959.
Maximum upstream pressure: 1600kPa.
Maximum working temperature: 80°C.
Adjustment pressure range: 100-500kPa.
Factory setting: 300 kPa.
Pressure test port upstream and pressure test port downstream (G 1/4'')
Self-contained replaceable cartridge.
Connections: Inlet - 20mm Female. Outlet - 20mm Male.
LOW LEAD ready as an acceptable solution for G12/AS1
